Featured Research
from universities, journals, and other organizations
Seeing below the surface: Ultra-thin, high-speed detector captures unprecedented range of light waves
Date:
September 7, 2014
Source:
University of Maryland
Summary:
Research could lead to
light detectors that can see below the surface of bodies, walls, and
other objects, with applications in emerging terahertz fields such as
mobile communications, medical imaging, chemical sensing, night vision,
and security.
Top-down view of
broadband, ultra-fast graphene detector capable of detecting terahertz
frequencies at room temperature. (symbols: Cr for chromium, Au for
gold).
Credit: Thomas Murphy
New
research at the University of Maryland could lead to a generation of
light detectors that can see below the surface of bodies, walls, and
other objects. Using the special properties of graphene, a
two-dimensional form of carbon that is only one atom thick, a prototype
detector is able to see an extraordinarily broad band of wavelengths.
Included in this range is a band of light wavelengths that have exciting
potential applications but are notoriously difficult to detect:
terahertz waves, which are invisible to the human eye.
A research paper about the new detector was published online Sept. 7, 2014 in the journal Nature Nanotechnology.
Lead author Xinghan Cai, a UMD physics graduate student, said a
detector like the researchers' prototype "could find applications in
emerging terahertz fields such as mobile communications, medical
imaging, chemical sensing, night vision and security."
The light we see illuminating everyday objects is actually only a very narrow band of wavelengths and frequencies. Terahertz light waves' long wavelengths and low frequencies fall between microwaves and infrared waves. The light in these terahertz wavelengths can pass through materials that we normally think of as opaque, such as skin, plastics, clothing and cardboard. It can also be used to identify chemical signatures that are emitted only in the terahertz range.
Few technological applications for terahertz detection are currently realized, however, in part because it is difficult to detect light waves in this range. In order to maintain sensitivity, most detectors need to be kept extremely cold, around 4 Kelvin, or -452 degrees Fahrenheit. Existing detectors that work at room temperature are bulky, slow and prohibitively expensive.
The new room temperature detector, developed by the UMD team and colleagues at the U.S. Naval Research Lab and Monash University, Australia, gets around these problems by using graphene, a single layer of interconnected carbon atoms. By utilizing the special properties of graphene, the research team has been able to increase the speed and maintain the sensitivity of room temperature wave detection in the terahertz range.
Using a new operating principle called the "hot-electron photothermoelectric effect," the research team created a device that is "as sensitive as any existing room temperature detector in the terahertz range and more than a million times faster," says Michael Fuhrer, professor of physics at UMD and Monash University.
Graphene, a sheet of pure carbon only one atom thick, is uniquely suited to use in a terahertz detector because when light is absorbed by the electrons suspended in the honeycomb lattice of the graphene, they do not lose their heat to the lattice but instead retain that energy.
The concept behind the detector is simple, says UMD Physics Professor Dennis Drew. "Light is absorbed by the electrons in graphene, which heat up but don't lose their energy easily. So they remain hot while the carbon atomic lattice remains cold." These heated electrons escape the graphene through electrical leads, much like steam escaping a tea kettle. The prototype uses two electrical leads made of different metals, which conduct electrons at different rates. Because of this conductivity difference, more electrons will escape through one than the other, producing an electrical signal.
This electrical signal detects the presence of terahertz waves beneath the surface of materials that appear opaque to the human eye--or even X-rays. You cannot see through your skin, for example, and an X-ray goes right through the skin to the bone, missing the layers just beneath the skin's surface entirely. Terahertz waves see the in-between. The speed and sensitivity of the room temperature detector presented in this research opens the door to future discoveries in this in-between zone.
The light we see illuminating everyday objects is actually only a very narrow band of wavelengths and frequencies. Terahertz light waves' long wavelengths and low frequencies fall between microwaves and infrared waves. The light in these terahertz wavelengths can pass through materials that we normally think of as opaque, such as skin, plastics, clothing and cardboard. It can also be used to identify chemical signatures that are emitted only in the terahertz range.
Few technological applications for terahertz detection are currently realized, however, in part because it is difficult to detect light waves in this range. In order to maintain sensitivity, most detectors need to be kept extremely cold, around 4 Kelvin, or -452 degrees Fahrenheit. Existing detectors that work at room temperature are bulky, slow and prohibitively expensive.
The new room temperature detector, developed by the UMD team and colleagues at the U.S. Naval Research Lab and Monash University, Australia, gets around these problems by using graphene, a single layer of interconnected carbon atoms. By utilizing the special properties of graphene, the research team has been able to increase the speed and maintain the sensitivity of room temperature wave detection in the terahertz range.
Using a new operating principle called the "hot-electron photothermoelectric effect," the research team created a device that is "as sensitive as any existing room temperature detector in the terahertz range and more than a million times faster," says Michael Fuhrer, professor of physics at UMD and Monash University.
Graphene, a sheet of pure carbon only one atom thick, is uniquely suited to use in a terahertz detector because when light is absorbed by the electrons suspended in the honeycomb lattice of the graphene, they do not lose their heat to the lattice but instead retain that energy.
The concept behind the detector is simple, says UMD Physics Professor Dennis Drew. "Light is absorbed by the electrons in graphene, which heat up but don't lose their energy easily. So they remain hot while the carbon atomic lattice remains cold." These heated electrons escape the graphene through electrical leads, much like steam escaping a tea kettle. The prototype uses two electrical leads made of different metals, which conduct electrons at different rates. Because of this conductivity difference, more electrons will escape through one than the other, producing an electrical signal.
This electrical signal detects the presence of terahertz waves beneath the surface of materials that appear opaque to the human eye--or even X-rays. You cannot see through your skin, for example, and an X-ray goes right through the skin to the bone, missing the layers just beneath the skin's surface entirely. Terahertz waves see the in-between. The speed and sensitivity of the room temperature detector presented in this research opens the door to future discoveries in this in-between zone.
Story Source:
The above story is based on materials provided by University of Maryland. Note: Materials may be edited for content and length.
The above story is based on materials provided by University of Maryland. Note: Materials may be edited for content and length.
Journal Reference:
- Xinghan Cai, Andrei B. Sushkov, Ryan J. Suess, Mohammad M. Jadidi, Gregory S. Jenkins, Luke O. Nyakiti, Rachael L. Myers-Ward, Shanshan Li, Jun Yan, D. Kurt Gaskill, Thomas E. Murphy, H. Dennis Drew, Michael S. Fuhrer. Sensitive room-temperature terahertz detection via the photothermoelectric effect in graphene. Nature Nanotechnology, 2014; DOI: 10.1038/nnano.2014.182
Cite This Page:
Share This
More Matter & Energy News
Sunday, September 7, 2014
Featured Research
from universities, journals, and other organizations
Continuing Bragg Legacy of Structure Determination
Sep. 7, 2014 — Over 100 years since the
Nobel Prize-winning father and son team Sir William and Sir Lawrence
Bragg pioneered the use of X-rays to determine crystal structure,
researchers have made significant new ... full story
- Continuing Bragg Legacy: Structure Determination
- Rethinking Basic Science of Graphene Synthesis
- Electronic Nose Can Detect Sub-Groups of Asthma
- Ultra Sensitive Sensor: Single-Molecule Detection
- Magnetic Nanocubes Self-Assemble
- Metallic Alloy Ductile at Cryogenic Temps
- Artificial Cells Take Their First Steps
- Decoding the Role of Water in Gold Nanocatalysis
- 2-D or 3-D? That Is the (Emotional) Question
- Birth of a Mineral: Trapping Carbon Dioxide?
newer top stories | older top stories
No comments:
Post a Comment
Please leave a comment-- or suggestions, particularly of topics and places you'd like to see covered